Why are there black bars on my Panasonic TH-55SQ1W Monitor?
If there are areas at the top and bottom of the screen where picture is not displayed when using a video software program with a screen wider than one in the 16:9 mode, blank areas separate from the images are formed at the top and bottom of the screen.
What to do if my Panasonic TH-55SQ1W has no picture and no sound?
If your Panasonic Monitor is displaying no picture and producing no sound, there are several potential causes: * It may not be plugged into the AC outlet. * It may not be switched on. * There may be an issue with the Picture and Brightness/Volume settings. To resolve these issues, check the power cord to ensure it's properly connected to a functioning AC outlet. Then, verify that the monitor is switched on by pressing the or the button. Finally, check the Picture and Brightness/Volume settings by pressing the or the button.
How to fix no sound on my Panasonic Monitor with a normal picture?
If you have a normal picture but no sound on your Panasonic Monitor, the issue might be with the volume settings. Check whether the mute function has been activated on the remote control.
Why does my Panasonic TH-55SQ1W Monitor power off automatically?
Your Panasonic Monitor might be turning off unexpectedly due to power management settings. Check the settings for [No signal power off], [HDMI1 power management], [HDMI2 power management], [DisplayPort power management], [DIGITAL LINK power management], [DVI-D power management], [PC power management] and [No activity power off]. One of these settings may be set to [On (Enable)].
How to fix a cut-off picture on my Panasonic TH-55SQ1W?
If the top or bottom of the picture on your Panasonic Monitor screen is cut off, adjust the position of the picture on the screen.
Why is there no picture or sound from the DIGITAL LINK terminal on my Panasonic Monitor?
If there is no picture displayed or sound output from the [DIGITAL LINK] terminal on your Panasonic Monitor, check whether the connection has been made properly between the video (output) equipment and twisted pair cable transmitter and between the twisted pair cable transmitter and this product.
Why is the RS-232C uncontrollable on my Panasonic TH-55SQ1W Monitor?
If the RS-232C is uncontrollable on your Panasonic Monitor, check whether the connection has been made properly.
Why can't I play a file with 'Memory viewer' on my Panasonic TH-55SQ1W Monitor?
If a file can be played back with “USB media player” but not with “Memory viewer” on your Panasonic Monitor, check the playback file specifications of “USB media player” and “Memory viewer.”
What to do if a display error such as “no picture” occurs, or remote control operation is suddenly disabled on my Panasonic TH-55SQ1W Monitor?
If you encounter a display error or disabled remote control, remove the power plug from the socket outlet. Then, reinsert it after 5 seconds or more to turn the power back on.
What to do if there is no picture displayed or sound output sometimes on Panasonic Monitor?
If you're using a selector or distributor with HDMI or DVI signals, try turning the power off and on again. Alternatively, replace the selector or distributor to see if that improves the situation.
General| Panel Type | IPS |
|---|---|
| Contrast Ratio | 1200:1 |
| PC Audio In | Yes |
| Built-in Speakers | Yes (10 W + 10 W) |
| VGA | No |
| 3.5mm audio in | Yes |
| Screen Size | 55 inches |
| Resolution | 3840 x 2160 pixels |
| Viewing Angle | 178°/178° |
| HDMI | HDMI x 3 |
| DisplayPort | DisplayPort x 1 |
| USB | USB x 2 (USB 3.0 x 1, USB 2.0 x 1) |
| Audio Out | Yes |
| Color Gamut | sRGB |
To Next Page
