What to do if there is no picture and no sound on my Panasonic Monitor?
If your Panasonic Monitor shows no picture and produces no sound, ensure it is plugged into an AC outlet and switched on. Check the Picture and Brightness/Volume settings by pressing the or button on the remote control.
Why is my Panasonic Monitor power turning off automatically?
If your Panasonic Monitor is unexpectedly turning off, check the settings for [No signal power off], [HDMI power management], [DIGITAL LINK power management], [DVI-D1 power management], [DVI-D2 power management], [PC power management] and [No activity power off]. Ensure that none of these are set to [On (Enable)].
How to fix Panasonic Monitor remote control if it is not working?
If the remote control for your Panasonic Monitor isn't working, check if the batteries are discharged or inserted incorrectly. Also, make sure the remote control sensor isn't exposed to outdoor light or strong fluorescent light, and that there are no obstacles between the sensor and the remote. Verify you're using the remote specifically designed for the unit. Check that the option other than [Off] is selected in [Controller user level] in the [Options] menu. Check whether [Control settings] - [Controller ID function] menu is set to [On]. Check whether switch is set to .
What to do if my Panasonic TH-55VF2W Monitor power cannot be turned on?
If your Panasonic Monitor won't turn on, verify that the power plug or connector is securely connected to both the socket and the display. Also, check that the at the back of the display is switched to ON ( | ).
Why is there no sound on my Panasonic TH-55VF2W but the picture is normal?
If your Panasonic Monitor displays a normal picture but has no sound, check the volume and ensure that the mute function has not been activated on the remote control.
What to do if my Panasonic Monitor displays an error or the remote control is disabled?
If your Panasonic Monitor shows a display error or the remote control is disabled, remove the power plug from the socket outlet. Wait for at least 5 seconds before reinserting it to turn the power back on.
Why is there no picture but normal sound on my Panasonic Monitor?
If your Panasonic Monitor has normal sound but no picture, it might be due to a signal with a non-applicable color system format or frequency being input. In this case, only the input terminal indication will be displayed.
Why is the RS-232C uncontrollable on my Panasonic Monitor?
If the RS-232C on your Panasonic Monitor is uncontrollable, first, check that the connection has been made properly. To control RS-232C with the Display’s SERIAL IN terminal: Check that [Control settings] - [Serial control] is set to [SERIAL IN]. To control RS-232C with the twisted pair cable transmitter: Check that [Control settings] - [Serial control] is set to [DIGITAL LINK], [Network settings] - [Network control] is set to [On] and [DIGITAL LINK mode] is set to [Auto], [DIGITAL LINK] or [Long reach].
How to fix the cut off picture on my Panasonic TH-55VF2W Monitor?
If the top or bottom of the picture on your Panasonic Monitor screen is cut off, the image position has been adjusted in the [Position] menu. Adjust the position of the picture on the screen.
Why is the LAN uncontrollable on my Panasonic Monitor?
If the LAN is uncontrollable on your Panasonic Monitor, first check that the connection has been made properly. To control with WEB browser control or command control, check that [Network settings] - [Network control] is set to [On]. Check that [LAN setup] is set properly. When connecting to a device of AMX, Extron or Crestron Electronics, Inc., set [AMX D. D.], [Extron XTP] or [Crestron Connected™] according to the device to use. See the [DIGITAL LINK status] - [Signal quality] information to check the LAN cable status such as whether the LAN cable is disconnected or the cable is not shielded.
General| Display Type | LCD |
|---|---|
| Panel Technology | IPS |
| Backlight Type | LED |
| Resolution | 1920 x 1080 |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| Viewing Angle (Horizontal/Vertical) | 178°/178° |
| Operating Hours | 24/7 |
| Screen Size | 55 inch |
| Input Terminals | HDMI, DVI-D, DisplayPort, VGA |
| Output Terminals | Audio Out (3.5mm) x 1 |
To Next Page