What to do if [Controller ID function] cannot be used on Panasonic TH-55VF2W Monitor?
If the [Controller ID function] cannot be used on your Panasonic Monitor, check whether [Control settings] - [Controller ID function] is set to [On]. Also, check whether switch is set to .
Why is there no picture or sound from the [DIGITAL LINK] terminal on my Panasonic TH-55VF2W Monitor?
If there is no picture or sound output from the [DIGITAL LINK] terminal on your Panasonic Monitor, check whether the connection has been made properly between the video (output) equipment and twisted pair cable transmitter and between the twisted pair cable transmitter and this product. Check that [Network settings] - [DIGITAL LINK mode] is not set to [Ethernet].
General| Display Type | LCD |
|---|---|
| Panel Technology | IPS |
| Backlight Type | LED |
| Resolution | 1920 x 1080 |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| Viewing Angle (Horizontal/Vertical) | 178°/178° |
| Operating Hours | 24/7 |
| Screen Size | 55 inch |
| Input Terminals | HDMI, DVI-D, DisplayPort, VGA |
| Output Terminals | Audio Out (3.5mm) x 1 |
To Next Page