Panasonic TH-80LFB70E

11
Video equipment connection
Connections
Please use 8 /10 W speaker.
Speaker connection
Red
Black
Red
Black
1
While pressing the lever,
insert the core wire.
2
Return the lever.
AUDIO 1 IN:
Audio input terminal
shared with VIDEO
and COMPONENT/
RGB IN. (see page 12)
PC IN: PC Input Terminal
Connect to video terminal of PC or
equipment with Y, P B (C B ) and P R (C R )
output (see page 14).
DVI-D IN: DVI-D Input Terminal (see page 13)
LAN, DIGITAL LINK*
Connect to a DIGITAL LINK input terminal network
to control the Display. Alternatively, connect to a
device that sends video and audio signals via the
DIGITAL LINK terminal. (see page 17)
SERIAL:
Serial Control Terminal.
Control the Display
by connecting to
PC. (see page 15)
AV IN (VIDEO): Composite Video Input Terminal
(see page 12)
COMPONENT/RGB IN: Component/RGB Video Input
Terminal (see page 12)
* DIGITAL LINK is technology that enables signals such as audio and video to be transmitted using twisted pair cables.
For details, see the Operating Instructions - “Network Operations”.
AV IN (HDMI 1, HDMI 2): HDMI Input
Terminal (see page 12)
Connect to video equipment such as
VCR or DVD player.
AUDIO 2 IN:
Audio input terminal
shared with DVI-D IN and
PC IN. (see page 13, 14)
PC OUT:
Monitor Out Terminal.
Video signals being
reproduced on the display
are output to another sub
monitor as PC video signals.
(see page 16)
SLOT: Terminal board (optional accessories) insert slot
(see page 4)
Note:
The upper side slot is for terminal board with 2-slot width. The
terminal board with 1-slot width does not function when installed in
the upper side slot.