To Next PageTo Next PageWhy is the LAN uncontrollable on my Panasonic TH-80SF2H Monitor?
If the LAN is uncontrollable on your Panasonic Monitor, verify that the connection has been made properly, [Network settings] - [Network control] is set to [On], and [LAN setup] is configured correctly.
Why is the RS-232C uncontrollable on my Panasonic Monitor?
If the RS-232C is uncontrollable on your Panasonic Monitor, check if the connection has been made properly and ensure that [Network settings] - [Serial control] is set to [SERIAL IN].
What to do if Panasonic TH-80SF2H sometimes has no picture or sound?
If you sometimes experience no picture or sound output from your Panasonic Monitor, try powering it off and on again. Alternatively, replace the selector or distributor.
How to enable [Controller ID function] on Panasonic Monitor?
To enable the [Controller ID function] on your Panasonic Monitor, verify that the [Controller ID function] is set to [On], or the switch is set to .
What to do if my Panasonic Monitor has no picture but normal sound?
If there's no picture but normal sound on your Panasonic Monitor, check if the input signal has a non-applicable color system format or frequency.
What to do if Panasonic Monitor displays 'no picture' error?
If your Panasonic Monitor displays a 'no picture' error or the remote control suddenly stops working, remove the power plug from the socket outlet and reinsert it after 5 seconds or more to turn the power back on.
Why does my Panasonic TH-80SF2H power off automatically?
If your Panasonic Monitor's power unexpectedly turns off, check the settings for [No signal power off], [HDMI1 power management], [HDMI2 power management], [DIGITAL LINK power management], [DVI-D power management], [PC power management] and [No activity power off].
Why is my Panasonic TH-80SF2H remote control not working?
If your Panasonic Monitor remote control isn't working, check if the batteries are completely discharged or improperly inserted. Also, ensure that the remote control sensor isn't exposed to outdoor light or strong fluorescent light and that there are no obstacles between the sensor and the remote.
What to do if my Panasonic TH-80SF2H Monitor has no picture and no sound?
If your Panasonic Monitor isn't displaying a picture and there's no sound, verify that the device is properly plugged into the AC outlet and switched on. Also, check the Picture and Brightness/Volume settings by pressing the or the .
How to fix Panasonic TH-80SF2H Monitor when there is picture but no sound?
If your Panasonic Monitor displays a normal picture but has no sound, ensure that the mute function on the remote control hasn't been activated.
General| Screen Size | 80 inches |
|---|---|
| Panel Type | IPS |
| Response Time | 8 ms |
| Viewing Angle | 178°/178° |
| External Control Terminals | RS-232C, LAN |
| Aspect Ratio | 16:9 |
| Connectivity | LAN |
| Input Terminals | HDMI, DVI-D, VGA |
| Output Terminals | Audio |
| Resolution | 1920 x 1080 pixels |
