To Next PageTo Next PageWhat to do if my Panasonic Monitor shows a 'no picture' error or the remote is disabled?
If your Panasonic Monitor shows a display error such as 'no picture' or the remote control is suddenly disabled, remove the power plug from the socket outlet, and insert it again after 5 seconds or more to turn the power on.
How to fix Panasonic TH-80SF2HU Monitor when there is picture but no sound?
If your Panasonic Monitor displays a normal picture but has no sound, ensure that the mute function on the remote control hasn't been activated.
What to do if my Panasonic TH-80SF2HU Monitor has no picture and no sound?
If your Panasonic Monitor isn't displaying a picture and there's no sound, verify that the device is properly plugged into the AC outlet and switched on. Also, check the Picture and Brightness/Volume settings by pressing the or the .
Why is my Panasonic Monitor remote control not working?
If your Panasonic Monitor remote control isn't working, check if the batteries are completely discharged or improperly inserted. Also, ensure that the remote control sensor isn't exposed to outdoor light or strong fluorescent light and that there are no obstacles between the sensor and the remote.
Why does my Panasonic Monitor power off automatically?
If your Panasonic Monitor's power unexpectedly turns off, check the settings for [No signal power off], [HDMI1 power management], [HDMI2 power management], [DIGITAL LINK power management], [DVI-D power management], [PC power management] and [No activity power off].
What to do if my Panasonic TH-80SF2HU Monitor has no picture?
If your Panasonic Monitor displays no picture, ensure it is plugged into the AC outlet and switched on. Check the picture and brightness/volume settings by pressing the or the .
Why are there spots on my Panasonic TH-80SF2HU Monitor screen?
The red, blue, green, and black spots that may appear on your Panasonic Monitor screen are a characteristic of liquid crystal panels and are not a problem.
How to fix image retention on Panasonic TH-80SF2HU Monitor?
If image retention appears on your Panasonic Monitor, display a general moving picture for a while to make it disappear.
Why is there no picture or sound from Panasonic TH-80SF2HU's [DIGITAL LINK] terminal?
If there's no picture or sound output from the [DIGITAL LINK] terminal on your Panasonic Monitor, check the connection between the video (output) equipment and the twisted pair cable transmitter. Also, ensure that [Network settings] - [DIGITAL LINK mode] is not set to [Ethernet].
Why is the RS-232C uncontrollable on my Panasonic Monitor?
If the RS-232C is uncontrollable on your Panasonic Monitor, check if the connection has been made properly and ensure that [Network settings] - [Serial control] is set to [SERIAL IN].
General| Screen Size | 80 inches |
|---|---|
| Panel Type | IPS |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| Viewing Angle (Horizontal/Vertical) | 178°/178° |
| Operating Temperature | 0°C to 40°C |
| Display Type | LCD |
| Aspect Ratio | 16:9 |
| Resolution | 1920 x 1080 pixels |
| Contrast Ratio | 1, 200:1 |
| Input Terminals | HDMI, DVI-D, VGA, USB |
| Output Terminals | Audio Out |
| Built-in Speakers | Yes |
| Power Consumption | 320 W |
