Panasonic TH-L32X10H

TH-L32X10H
10
6 Location of Controls and Components
6.1. Wire Dressing
1. Wiring No.1 ~ No.7
2. Remove dust of terminal of LVDS and PB connector. (by ion blow)
Pos. A11
3. Insert LVDS into A11.
4. Remove dust of terminal of FFC and PB connector. (by ion blow)
Pos. XH2&A88
5. Insert FFC into XH2 and A88.
6. Insert tunner connector into cable connector. (TU2901)