Panasonic TH-P50ST60Z

- 126 -
3. When the confirmation screen is displayed, select Yes with / and
press OK to set
4. Follow the on-screen instructions
●
Auto Tuning will automatically start.
= Note =
●
To retune TV channels only (e.g. after moving house), set Auto Tuning.
Watching Tuning and editing channels Auto Tuning
Updating the TV Software
Information
A new version of software may be released for download to enhance the
performance or operations of the TV.
If there is an update available and the channel has the update information, a
notification message is displayed.
●
To download
OK
– Press EXIT when not downloading
Auto update
You can update new software automatically.
1. Display the menu with MENU
2. Select Setup
System Menu System Update Auto Update Search in
Standby with
/ and press OK to access
3. Select Immediately / 1 hour after / Off with
/ and press OK to set
●
If System Update is performed, the software will be updated (TV functions
may be changed). If you do not want to do so, set Auto Update Search in
Standby to Off.
●
Every time you set, the TV automatically performs search in Standby and
downloads an update if any software updates are available.
●
The automatic updating is performed under the following conditions:
– Standby (TV turned off by the remote control)
– Recording by One Touch Recording is not in progress.
= Note =
●
Download may take a few hours.
●
During software download and update, DO NOT switch off the TV.