- 137 -
Scrolling Bar
Displays scrolling bar pattern to assist elimination of panel “image retention”.
●
Press OK to start scrolling and press any buttons (except Standby) to exit
this mode.
●
For positive effect to eliminate “image retention”, it may be necessary to
display for a long time.
3D Settings
3D Detection
(On (Advance) / On / Off)
Selects whether to switch to the 3D mode automatically.
On (Advance):
Detects all the 3D format signals and displays the 3D image
automatically.
On:
Detects the particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
●
To view 3D images without any notifications and operations, set to On
(Advance).
3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found.
●
This function is not available when 3D Detection is set to On (Advance).
●
For Digital TV, Component and HDMI input
3D Refresh Rate
(Auto / 100Hz / 120Hz)
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear.
100Hz:
If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
120Hz:
If light appears to flicker under fluorescents (or dimmers) of 60 Hz.