- 152 -
Digital TV
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
●
Due to the digital reception technologies involved, quality of the Digital TV
signals may be relatively low in some cases, despite good reception of
Analogue TV channels.
Unable to receive signals with a high-performance aerial
●
Install an aerial individually for the TV and VCR (or use a splitter).
Interference or frozen / disappearing image in Digital TV
●
Check Signal Condition. If Signal Quality is displayed in red, check aerial.
If the problem persists, consult your local Panasonic dealer.
Watching Tuning and editing channels Signal Condition
●
Turn the TV off with Mains power On / Off switch, then turn it on again.
Sound
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
No sound is produced
●
Is “Sound mute” active? Press MUTE to switch sound mute on or off.
●
Is the volume set to the minimum?
Sound level is low or sound is distorted
●
Sound signal reception may be poor.
●
Set MPX in the Sound Menu to Mono. (Analogue TV)
Settings Sound Advanced settings
Unusual sound from the TV