Panasonic TK-AS66-ZEX - Installing the Alkaline Ionizer

EN13
Installing the Alkaline Ionizer
English
Preparations
1
Choose a stable, level surface.
21 cm
or more
13 cm
or more
2
Extend the power cord and hose in the manner that best suits the
location where the unit is installed.
 Do not fl atten or bend the cord or hose.
Bottom of the unit
When extending the cord and hose from the left
Spring (to prevent
the hose from being
bent)
Wedge the hoses into this cutout
Condensation water outlet
Cutout
Pulling the drain hose slightly toward
the inside as shown in the fi gure takes
up any slack between this hose and
the acidic water hose
Water supply hose
Front panel of the main unit
When extending the cord and hose from the right
Condensation water outlet
Front panel of the unit
Position the acidic water hose so that it
will not go over the condensation water
outlet (since the unit will be unstable
when it is placed right side up).
TK-AS66-ZEXEn.indb13TK-AS66-ZEXEn.indb13 2017/01/3015:04:132017/01/3015:04:13