Panasonic TK-AS66-ZEX - Pre-Operation Guidance; Alkaline Ionizer Operating Tips

EN18
Before Operation
Tips on operating the Alkaline Ionizer (using it to suit the intended application)
Alkaline ion water:
 The pH level of alkaline ion water increases by about 0.5 per setting in the following sequence: Alkaline
1 → Alkaline 2 → Alkaline 3 → Alkaline 4 (Strongly Alkaline). In these instructions, “Alkalines 1 to 3” are
collectively referred to as “Alkaline”.
 Keep the amount of water consumed daily at around 0.5 liter to 1 liter at the “Alkaline 3”.
Application pH standard
Removing
astringency,
boiling vegetables
When removing the astringency from burdock and
spinach, etc. (Do not drink this water.)
9.5 ~ 10.5
Drinking water in
daily life
For coff ee, tea, boiling or stewing food,
cooking food in pots at the table, soups
9.0 ~ 10.0
Drinking water for
Experienced user
When cooking rice 8.5 ~ 9.5
Drinking water for
new user
When starting to drink alkaline ion water
(fi rst two weeks or so)
8.0 ~ 9.0
Purifi ed water:
 This is fi ltered water which contains
minimal impurities.
Applications Taking medicine or
making baby formula, etc.
The water has not been subjected to
electrolysis.
Weak acidic water:
 The mild acidity of this water is close
to the acidity of the human skin.
Applications Washing the face
pH standard 5.0 to 6.5
Acidic water:
 When is pressed and the fl ow is
reduced at the faucet, acidic water with a pH
level of 3 or so comes out of the acidic water
spout.
(For removing tea stains from tableware,
odors left behind by cooking fi sh dishes, etc.)
pH standard 2.8 to 3.5*
*: When the pH3 water quality indicator lights
up.
TK-AS66-ZEXEn.indb18TK-AS66-ZEXEn.indb18 2017/01/3015:04:162017/01/3015:04:16