EN31
English
How to set
(For details on the items which can be set and the settings established when
purchased, see P. EN30.)
Note
When is pressed in steps 2 to 5, the previous screen is restored. After the settings are completed, the previous screen
will not be restored even when the button is pressed.
Displays on the screens indicated will be in Chinese even if the English display mode is established.
Item set
Continue mode OFF (ON)
Water output buzzer OFF (ON)
Weak acidic buzzer OFF (ON)
1
Turn off the faucet,
and press
on the control
panel for 1 second.
2
Press .
3
Select the item
using
.
Each time this button
is pressed, the
selection changes.
4
Press .
The current setting
is displayed in white
lettering against a black
background.
5
Select the item
using
.
Each time this button
is pressed, the
selection changes.
6
Press .
<The setting is fi nished>
If “ON” was
selected, the
“ 持續模式「ON」
完畢 ” message
appears.
If “ON” was
selected, the
“ 出水量警示音「ON」
完畢 ” message
appears.
If “ON” was
selected, the
“ 弱酸性警示音「ON」
完畢 ” message
appears.
After about 3 seconds
7
Select the item
using
.
Each time this button is
pressed, the selection changes.
8
Press .
Select “ON” to set
this item ON
Select “ON” to set
this item ON
Select “ON” to set
this item ON
Continue mode
set to OFF.
Water output
buzzer set to OFF.
Weak acidic
buzzer set to OFF.
Select “ 不是 ” to set
another item.
If “ 不是 ” was selected,
go back to step 3.
e.g.)
Remaining cartridge life display (standby status)
Mode selection
Setting mode
Check mode
Setting mode
pH fi ne adjustment
Continue mode
Water output buzzer
Setting mode
pH fi ne adjustment
Continue mode
Water output buzzer
Setting mode
pH fi ne adjustment
Continue mode
Water output buzzer
Setting mode
Weak acidic buzzer
Alkaline priority
Buzzer volume
Continue mode
On
Off
Water output buzzer
On
Off
Weak acidic buzzer
On
Off
Continue mode
On
Off
Water output buzzer
On
Off
Weak acidic buzzer
On
Off
Exit the setting mode?
Yes
No
TK-AS66-ZEXEn.indb31TK-AS66-ZEXEn.indb31 2017/01/3015:04:212017/01/3015:04:21