Installation location
Do not block the main spout or bend, twist, fl atten,
pull or clamp the hose.
(Doing so may cause water to leak, prevent the output of
water or cause other malfunctioning.)
Do not connect a hose or any other appliances to
main spout, acidic water spout or drain outlet.
(Doing so may cause water leaks or malfunctions.)
Do not use the Alkaline Ionizer if the outlet pipe is
loose.
(Doing so may cause water leaks or damage.)
If it has come loose, screw it in securely.
Do not connect the Alkaline Ionizer to a hot water
supply system which is not equipped with a
directional control check valve (for preventing the
backfl ow of the water).
(Doing so may lead to malfunction in the hot water supply
system.)
Do not connect the Alkaline Ionizer to a main stop
system water boiler (whose construction does not
permit the water to be stopped at the hot water
outlet) [such as an instantaneous water heater].
(Doing so may lead to malfunction in the water boiler.)
Install the main unit on a level surface.
(Failure to do so may cause the main unit to topple over and
possibly cause injury.)
When mounting the main unit on a wall for use, be
absolutely sure to ask your dealer or a contractor
to do the installation work.
(If you try to do the work yourself, the main unit may fall off ,
possibly causing an accident.)
The location where the main unit is to be installed
must be able to support a weight of over 6 kg.
If the installation location does not have enough strength to
support the main unit, the Alkaline Ionizer may fall, resulting
in an accident and kitchen damage.
To Next Page
Loading...
