34
PC Card / ExpressCard
2 Insert the ExpressCard (upper slot) (D) or the PC Card (lower
slot) (E) with the label side up until it securely fits in to the slot.
z For further information, refer to the instruction manual of the card.
NOTE
<Only for model with Smart Card slot>
z The upper slot (D) is the PC Card slot, and the lower slot (E) is the Smart Card slot. Express Cards cannot be used.
For how to insert/remove a Smart Card: Î page 39
To remove the card
1 Disable the card function.
A Click on the notification area and select the card, then click [OK].
z This step is not necessary when removing the card after turning off the computer.
2 Open the cover and remove the card.
A Press the eject button (F). The eject button pops out.
B Press the eject button (F) again so the card comes out of the slot.
C Draw the card straight out.
NOTE
z Check the card’s specification to prevent the total operating current from exceeding the allowable limit. Otherwise mal-
function may occur.
Allowable Current: 3.3 V: 400 mA, 5 V: 400 mA
z Some types of cards cannot be used simultaneously.
z After repeating insertion and removal, some types of card will not be recognized. In this case, restart the computer.
To Next Page
Loading...
