51
Modem
The computer automatically resumes from sleep when the telephone connected to the modem rings.
You will need software to keep the computer in idle state waiting for a phone call, and if you prefer, to turn the computer to
sleep again afterward. For further information, refer to the instruction manual of the software application.
1 Click (Start) - [All Programs] - [Windows Fax and Scan].
2 Click [Tools] - [Fax Settings].
z A standard user needs to enter an administrator password.
z Check whether the modem you are using is displayed in Device name. If not, click [Select fax device] and select
the correct modem.
3 Add a check mark for [Allow the device to receive fax calls] and click [OK].
4 Click (Start) - [Computer] - [System properties] - [Device Manager].
z A standard user needs to enter an administrator password.
5 Double-click [Modems], and then double-click the internal modem.
6 Click [Power Management] and add a check mark for [Allow this device to wake the com-
puter], and then click [OK].
To set the time to return the computer to sleep
The computer will enter sleep after the set time even when the communication is not completed. You can avoid such an
uncompleted communication if you select [Never], but the computer does not return to sleep after resuming by a phone call.
A Click or on the notification area and click [More power options] - [Change when the computer sleeps].
B Set the expected communication time for the sleep setting.
Ring Resume Function
To Next Page
Loading...
