12
You may choose to protect the data on your computer from being accessed illegally or
overwritten accidentally by using a floppy disk. You can also set your computer to be
unbootable from a floppy disk.
Preventing the use of a floppy disk
Procedure
1
Run the Setup Utility ( page 34)
This error message is displayed when access to the
floppy disk drive is attempted.
Using and , select [Security]
2
Using and , select [Boot Up Drive] and press Enter
3
4
Using the and , select [Floppy Operation] and press
Enter
Preventing theft or damage to data using a floppy disk
Security Measures
Using and , select either [C:] or [CDD,DVD / A: / C:] and
press Enter
Using and , select [Disable] and press Enter
Press F10 , then select [Yes]
5
6
7
To enable the floppy operation
Select [Enable] at Step
6
To Next Page
Loading...
