34
Setup Utility
Press F2 while [Press <F2> to enter SETUP] is displayed.
The Setup Utility will not run if F2 is not pressed soon after the computer starts.
In this case, you need to restart your computer.
If [Enter Password] is displayed, enter your password.
When entering the User Password, if the [Set User Password], [Set Supervisor
Password] and [User Password Protection] have been set, [Advanced] menu will
not be displayed on the main screen.
To display the [Advanced] menu:
1
Restart the computer and press F2 when [Press <F2> for SETUP] is displayed.
2
When [Enter Password] is displayed, enter the Supervisor Password.
For more details, on-line help is available; press F1 .
Running the Setup Utility
Key Operations
F1 :To display the corresponding “help” file.
Enter :To display sub-menu.
Esc :To display [Exit] menu.
:To move among the menus.
, :To move among the items.
F5 F6 :To move among the values.
F9 * :To set default settings for the
operating system.
F10 :To save the settings and exit.
NOTE
NOTE
* When starting up the Setup Utility with the User Password, this key is not available.
Closing the Setup Utility page 39
press F2
To run the Setup Utility, you
need to restart your computer.
Press <F2> to enter SETUP
Upon seeing
this message
To Next Page
Loading...
