36
Advanced Menu
Serial port A:* [Enable]
Base I/O: [3F8/IRQ4]
Serial port B:* [Enable]
Device: [Touchscreen]
Base I/O: [2F8/IRQ3]
Parallel port:* [Enable]
Mode: [Bi-directional]
Base I/O: [378/IRQ7]
Sound Controller:* [Enable]
CardBus Controller A: [Enable]
Legacy USB [Disable]
Parameters
Setup Utility
* If [Enable] is set, sub items will be displayed.
( : Default)
*
1
If [Device] is not set to [Touchscreen], the touchscreen function can not be used. If [Device]
is not set to [IrDA], the infrared data communications function can not be used.
*
2
This item may not be displayed.
*
3
Setting impossible when [Parallel Port] is set to [Disable].
*
4
The default of this item depends on the setting of [Mode].
Enable
Disable
3F8/IRQ4 2F8/IRQ3
Enable
Disable
Touchscreen
IrDA
Port Replicator
2F8/IRQ3 2E8/IRQ10
DMA1 DMA0
Enable
Disable
Uni-directional
Bi-directional
ECP*
2
EPP*
2
378/IRQ7 3BC/IRQ5
DMA0 DMA1
Enable
Disable
Enable
Disable
Enable
Disable
Serial port A:
Base I/O**
Serial port B:
Device*
1
Base I/O*
2
DMA*
2
Parallel port:
Mode*
3
Base I/O*
2
DMA*
2
*
4
Sound Controller
CardBus Controller A
Legacy USB