17
5.2.1.2. Contents of adjustment mode
• Value is shown as a hexadecimal number.
• Preset value differs depending on models.
• After entering the adjustment mode, take note of the value in each item before starting adjustment.
5.2.1.3. How to exit
Switch off the power with the [POWER] button on the Display unit or the [POWER] button on the IR remote control.
Main item Sub item Sample Data Remark
ADJUST SUB-BRT 80C Factory Preset
WB-ADJ R-CUT 80 Factory Preset
G-CUT 80
B-CUT 80
R-DRV FC
G-DRV FF
B-DRV E8
ALL-CUT 80
ALL-DRV FC
OPTION Panel Type - Factory Preset
BOOT ROM
STBY-SET 00
EMERGENCY ON
OPT1 1
OPT2 1
OPT3 1
AGING RGBW
VERTICAL LINE
COUNT
ALL WHITE
ALL RED
ALL GREEN
ALL BLUE
ON/OFF
RAMP WHITE
RAMP RED
RAMP GREEN
RAMP BLUE
1% WINDOW
COLOR BAR
A-ZONE B-ZONE/4 TRIO
SCROLL
2 DOT OUTSIDE FRAME
LOW SETUP RED
LOW SETUP GREEN
LOW SETUP BLUE
SRV-TOOL - See next
To Next Page
Loading...
