Panasonic TU-Z100U - Display Unit

16
5.2. Display unit
5.2.1. How to enter into Service Mode
Service mode of the Display unit uses the IR remote control.
While pressing [VOLUME ( - )] button of the Display unit, press [INFO] button of the IR remote control three times within 2 seconds.
5.2.1.1. Key command
[1] button...Main items Selection in forward direction
[2] button...Main items Selection in reverse direction
[3] button...Sub items Selection in forward direction
[4] button...Sub items Selection in reverse direction
[VOL] button...Value of sub items change in forward direction ( + ), in reverse direction ( - )