Panasonic TU-Z100U - Wireless Unit (Transmitter)

39
8.3. Wireless unit (Transmitter)
8.3.1. Remove the Front cover
1. See Service Hint (Section 3.1.3.)
8.3.2. Remove the Fan
1. Remove the AL Tape.
2. Remove the screws (×2 ).
3. Disconnect the connector (WH1) and remove the Fan.
8.3.3. Remove the RM-Board
1. Disconnect the connector (RM81).
2. Remove the screw (×1 ) and remove the RM-Board.
8.3.4. Remove the WH-Board
1. Disconnect the connector (WH81).
2. Remove the screws (×2 ).
3. Disconnect the connector (WH2) and remove the WH-
Board.
8.3.5. Remove the WT-Board
1. Remove the WH-Board. (See section 8.3.4.)
2. Remove the screws (×2 ).
3. Disconnect the connector (WT2).
4. Remove the screws (×5 ) and the WT-Board shield
cover.
5. Remove the WT-Board from the Metal frame.