Panasonic TU-Z100U - Remove the Fan

28
8.1.7. Remove the GS-Board
1. Remove the Front panel assy. (See section 8.1.4.)
2. Disconnect the flexible cable (GS11).
3. Disconnect the connector (GS09).
4. Remove the screws (×2 ) and remove the GS-Board.
8.1.8. Remove the RM-Board
1. Remove the Front panel assy. (See section 8.1.4.)
2. Remove the screws (×2 ).
3. Remove the RM-Shield metal.
4. Disconnect the connector (RM81).
5. Remove the screw (×1 ) and remove the RM-Board.
8.1.9. Remove the Fan
1. Remove the Rear panel. (See section 8.1.2.)
2. Disconnect the connector (A35) and remove the Fan.
8.1.10. Remove the DH-Board and the DH-
Board shield metal
1. Remove the Rear panel. (See section 8.1.2.)
2. Disconnect the flexible cable (DH5).
3. Disconnect the connectors (DH71 and DH72).
4. Remove the screws (×4 ) and remove the DH-Board.
5. Unlock the cable clampers to free the flexible cable (A11-
GS11).
6. Unlock the cable clampers to free the cable (A9-GS09).