Panasonic TX-26LX50F - Removing the G-Board; Removing the K-Board; Removing the V-Board; Removing the Main Chassis

7.12. Removing the G-Board
1. Remove the G-Board bracket. (See 7.10.)
2. Push the hooks (7 points) to release the G-Board from the
G-Board brackets.
3. Remove the G-Board.
7.13. Removing the K-Board
1. Remove the rear AV bracket (See 7.4.) and the rear metal
frame (right). (See 7.5.)
2. Remove a coupler (K6) and release the cables from holder
on the K-Board bracket.
3. Remove the screws (2pcs).
4. Remove the K-Board bracket with the K-board.
5. Remove a screw.
6. Remove the K-Board.
7.14. Removing the V-Board
1. Remove the rear cover. (See 7.2.)
2. Remove the screws (2pcs).
3. Remove the V-Board.
4. Disconnect the coupler (V1).
7.15. Removing the main chassis
1. Remove the rear AV bracket (See 7.4.) and the rear metal
frame. (See 7.5.)
2. Disconnect the couplers (CN203, DG6, DG7, H4, H5, AP6,
AP10) and the earth lug (on the H-Board) from G-Board.
3. Release the cables from the clampers on the main chassis.
4. Remove the fixing screws (3pcs).
5. Remove the main chassis with the P-Board, the AP-Board,
the DG-Board and the H-Board.
16
TX-32LXD50 / TX-26LXD50 / TX-32LX50F / TX-32LX50P / TX-26LX50F / TX-26LX50P