English - 7 -
Other Connections
any connection. After the connection is done, you can turn on the units and use them.
Connector Type Cables Device
HDMI
Connection
(back&side)
VGA
Connection
(back)
AUDIO IN
VGA Audio
Connection
(back)
VGA Audio Cable
SPDIF
SPDIF
(Optical Out)
Connection
(back)
COMPOSITE
Composite
(Audio/Video)
Connection
(back)
Audio Video Cable
HEADPHONE
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
LAN
Ethernet
Connection
(back)
LAN / Ethernet Cable
To enable VGA audio, you will need
to use the back audio inputs with
a VGA audio cable for audio
connection. When using the wall
mounting kit (contact your dealer
to purchase one, if not supplied),
we recommend that you plug all
your cables into the back of the TV
before mounting on the wall. Insert
or remove the CI module only when
the TV is SWITCHED OFF. You
should refer to the module instruction
manual for details of the settings.
The USB inputs on the TV support
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your TV.
When connecting equipment using a
HDMI cable to your TV, to guarantee
sucient immunity against parasitic
frequency radiation and trouble-free
transmission of high denition sig
-
nals, you have to use a high speed
shielded (high grade) HDMI cable
with ferrites.
To Next Page
Loading...
