Panasonic TX-37LZ8F - Safety Precautions; Power Source

4
Safety Precautions
If you  nd any
abnormality,
remove the mains plug
immediately!
AC 220-240 V
50 Hz
Warning
Handling the mains plug and lead
•
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause  re.)
•
Ensure that the mains plug is easily accessible.
•
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
•
Do not damage the mains lead. (A damaged lead may cause  re or electrical shock.)
•
Do not move the TV with the lead plugged in the socket outlet.
•
Do not place a heavy object on the lead or place the lead near a high-temperature object.
•
Do not twist the lead, bend it excessively, or stretch it.
•
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
•
Do not use a damaged mains plug or socket outlet.
Do not expose to direct sunlight
and other sources of heat
•
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent  re never place any type of
candle or naked  ame on top or near the TV.
Power source
•
This TV is designed to operate on 220-240 V,
50 Hz AC.
Keep liquids away from the TV
•
To prevent damage which may result in  re or shock hazard,
do not expose this appliance to dripping or splashing.
•
Do not place containers with water ( ower vase, cups,
cosmetics, etc.) above the TV. (including on shelves
above, etc.)
Do not remove covers
NEVER modify the TV yourself
(High-voltage components may cause serious electrical shock.)
•
Have the TV checked, adjusted, or repaired at your
local Panasonic dealer.
Do not place foreign objects
inside the TV
•
Do not allow any objects to drop into the TV through
the air vents ( re or electrical shock may result).
Do not place the TV on sloped or
unstable surfaces
•
The TV may fall off or tip over.
Use only the dedicated pedestals
/ mounting equipment
•
Using an unapproved pedestal or other  xtures may
make the TV unstable, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
•
Use approved pedestals / mounts (p. 6).