English
30
Watching TV
1 Turn power on
(TV)
or
(Remote Control)
●
Mains power On / Off switch should be on.
(p. 28)
Displays the information bar at the bottom of the screen
for several seconds.
●
For information about the operation and settings,
refer to [eHELP]. (Search by Purpose > Read first >
Features)
2 Select the mode
TV Selection
Freesat
DVB
Analogue
Other Sat.
Satellite
●
Selectable modes vary depending on the stored
channels and selected country.
3 Select a channel
up
down
or
●
Freesat channel position numbers are in the 101 -
999 and 0101 - 0999 ranges. DVB and Other Sat. /
Satellite channel position begin from number 1
upward. Analogue channel position numbers are in
the 0 - 99 range.
How to Use eHELP
[eHELP] is the detailed operating instructions built into
the TV, and gives a more detailed explanation for a
better understanding of the operation of each feature.
1 Display [eHELP]
or
[Help]
[eHELP]
●
If the [eHELP] has been accessed previously since
the TV was turned on, the confirmation screen is
displayed to select whether to go to the [First page] or
to the [Last viewed page].
2 Select the menu
select
access
●
To access [How to use]
(green)
[Keyword Search]:
Search the content of eHELP in the keyword.
[Search by Purpose]:
Search the content of eHELP for each item.
[Support]:
Access the support information (FAQs, etc.).
3 Select the item
Example:
select
access
●
To return to the previous screen / field
To Next Page
Loading...
