- 110 -
Resets the TV to its original condition (i.e. no channels tuned in).
All settings are reset (channels, picture, sound settings, etc.).
1. Display the menu with MENU
2. Select Setup
System Menu Shipping Condition with / and press
OK to access
3. When the confirmation screen is displayed, select Yes with
/ and
press OK to set
4. Follow the on-screen instructions
●
Auto Setup will automatically start.
= Note =
●
To retune TV channels only (e.g. after moving house), set Auto Setup.
Watching Tuning and editing channels Auto Setup
Updating the TV Software
Preparations
A new version of software may be released for download to enhance the
performance or operations of the TV.
●
In DVB mode, a notification banner will appear when one of the BBC
channels is turned to if a new available software is found.
Auto update
You can update new software automatically.
1. Display the menu with MENU
2. Select Setup
System Menu System Update Auto Update Search in
Standby with / and press OK to access
3. Select On with
/ and press OK to set
●
If any software updates are available, the notification message will appear.
Standby:
Installs new software in standby condition.
Now:
Installs new software now.
●
If System Update is performed, the software will be updated (TV functions
may be changed). If you do not want to do so, set Auto Update Search in
Standby to Off.
= Note =
●
Download may take for a few hours.
To Next Page
Loading...
