Panasonic TX-L32E6B

- 32 -
●
AV2 (COMPONENT) terminals (WSS only)
Valid input signal format:
625 (576) / 50i, 50p
Invalid input signal format:
525 (480) / 60i, 60p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
●
HDMI terminal
Valid input signal format:
525 (480) / 60i, 60p
625 (576) / 50i, 50p
750 (720) / 60p, 50p
1,125 (1,080) / 60i, 50i
1,125 (1,080) / 60p, 50p, 24p
●
HDMI terminal does not receive WSS signal.
= Note =
●
If the screen size looks unusual when a widescreen-recorded programme
is played back on a VCR, adjust the tracking of the VCR. Read the manual
of the VCR.
Advanced Settings
You can adjust and set up the detailed picture settings for each Viewing
Mode. Set viewing mode to adjust and set up first.
●
To use this function completely, set Viewing Mode to True Cinema or
Custom.
Watching For best picture Viewing Mode
1. Display the menu with MENU
2. Select Picture
Viewing Mode with / and press OK to access
3. Select the mode with
/ and press OK to set
■ Adjust the detailed picture settings
1. Display the menu with MENU
2. Select Picture
Advanced Settings Adaptive Gamma Control / Black
Expander / Clear White Effect / White Balance / Colour Management /
Gamma with / and press OK to access