- 44 -
3) Press BACK/RETURN to store
= Note =
●
If a VCR is connected only with the RF cable in Analogue mode, edit VCR.
Auto Setup
Automatically retunes the channels received in the area.
●
This function is available if channel tuning is already performed.
●
Only the selected mode is retuned. All the previous tuning settings are
erased.
●
If Child Lock PIN number has been set, the PIN number is required.
Functions Child Lock PIN number
●
If tuning has not been done completely, set Manual Tuning.
Watching Tuning and editing channels Manual Tuning
■ DVB, Analogue channels
1. Select Auto Setup with / and press OK to access
2. The confirmation screen is displayed and press OK to start Auto Setup
(Settings are made automatically)
●
When the operation is completed, the channel at the lowest position will
be displayed.
■ Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu
2. Set Auto Setup with following control panel buttons
●
Move the cursor / select from a range of options / select the menu item
(up and down only)
●
Access the menu / store settings after adjustments have been made or
options have been set with INPUT/OK/HOLD for MENU button.
Channel Sorting by Region
You can sort DVB channels so that those with the best signal quality, or those
for your preferred region, appear nearer the top of your Channel List. (UK
only)
1. Select the region with
/ and press OK to access
To Next Page
Loading...
