Panasonic TX-P50U30E - Remove the Radiator Plate; Remove the Attachment Metal Bottom; Remove the Attachment Metal Top; Remove the Glass Holders

27
9.17. Remove the Radiator plate
1. Remove the Stand bracket and the Hanger metals. (See
section 9.12.)
2. Remove the screws (×15 ) and remove the Radiator
plate.
9.18. Remove the Attachment metal
bottom
1. Remove the Radiator plate. (See section 9.17.)
2. Remove the screws (×1 each) and remove the Attach-
ment metal bottom (L, R).
9.19. Remove the Attachment metal
top
1. Remove the Cabinet assy. (See section 9.16.)
2. Remove the screws (×3 , ×2 ) and remove the
Attachment metal top (L, R).
9.20. Remove the Glass holders
1. Remove the Cabinet assy. (See section 9.16.)
2. Remove the screws (×7 ).
3. Remove the Glass holder top.
4. Remove the screws (×7 ).
5. Remove the Glass holder bottom.
6. Remove the screws (×4 ).
7. Remove the Glass holder side (L, R).
9.21. Remove the K-Board
1. Remove the Glass holder bottom. (See section 9.20.)
2. Remove the claw (×1 ).
3. Disconnect the connector (K1) and Remove the K-Board
from LED Panel.