Panasonic TX32LX80

E
Contrast,
B rightness,
Colour,
Sharpness
1 4
P ause
the live TV programme
and
resume later (page 19)
Control the connected DIGA recorder to start or stop recording current
TV programme
(page 19)
C ontrols the connected
Panasonic
equipment
Easy control only with
VIERA
remote control"(page 20)
Speaker control"(page 21)
*You can also access VIERA Link Menu directly using the VIERA Link
button on the remote control.
B asic picture mode (Dynamic / Standard / Cinema I Eco)
" Picture mode will be memorized fbr each TV, AV1, AV2, AV3, PC,
HDMI1 and HDM112 mode.
" C.A.TS is in effect when picture mode is set to Eco.
A djusts colour, bilightness, etc. for each picture mode to suit your taste
Adjust tint of image
" For NTSC signal reception only.
" Item will be changed to TintWhen receiving YUV (601-1z) or HDMI
(601-1z) signal.
C hooses the colour balance of the entire image (Cool / Standard
Warm)
C olour density varying between broadcast channels can be adjusted to
three levels for each reception channel
0 Select the channel you want to adjust and set this function.
A utomatically
reduces image noise (Off / Strong
/
Weak / Auto)
* Set to Off when receiving a strong signal.
I f colour patterning is seen while watching still or slow moving pictures,
s et this function to On to obtain sharper and more accurate colours
( Off / On)
D isplayed only when receiving PAL or NTSC_ signal. Not displayed
during S-Video, Component
and HDMI inputs.
Press the OK, < or > button to reset the present Picture Menu to the
default setdngs.
B asic sound mode (Music / News / Cinema)
0 S ound mode will be memorized for each TV, AVII, AV2,-AV3, PC,
HDM11
and HDM12 mode.
A djust the equalizer for each sound mode.
0 Press the -< or > button to select frequency band. Then, press the A
or 17 button to adjust the level. Applicable for speakers only. (Does
not apply for Headphone.)
I
T X-37LX80A-002Z_ENJndd 14
3/19/08 4:35:29 PM
I