Panasonic TX32LX80 - Page 15

Adjusts volume level of right and left speakers
Adjusts the volume level of the
headphones
G ives a greater spatial
effect by using dynamic
enhancer (Off / On)
*Switching is also possible
by SURROUND button
on the remote
control.
C hooses according
to the signal when
HDMI is connected (Auto I
Digital /Analogue)
0
HDM12 terminal is for digital
signal only.
P ress the OK button to reset
the present Sound Menu to the
default
setfings.
V IERA Link function (Off I On) (page 18)
T eletext display mode (FASTEXT I List)
Sets the time the unit
automatically turns Off (Off / 15
/ 30 / 45 160 1
75190) (minutes)
C hild lock can
be set for each channel
and each AV mode
Image and sound
are not available during Child
lock On (Black screen
will appear)
0 Select the channel or AV mode
you want to lock and set this function.
B lue back display (Off
/ On)
"
On: Blue back display when there are no signals
" Off: Blue back display
off
Reproduction of irregular signals, such
as certain TV games and rental
video tapes, may be
improved. (Off / On)
E dits or sets channels (page 16)
Displayed during
AV mode. If a clear picture with
current colours
cannot be obtained when
a Broadcast or AV signal is received,
this
function is used. (Auto I PAL / SECAM I NTSC
4.431 NTSC 3.58)
PAL, SECAM and
NTSC 3.58 are different colour signal broadcast
transmission
systems applicable to different
countries. NTSC 4.43
is a
trick playback mode used in special
VCRs t6playback NTSC
recorded
video tapes through PAL television
equipment.
Displayed during AV mode. Available
only with 480p or 576p input
signals in a natural colour from digital
equipment connected to AV2
Component terminals.
Select SD
or HD to adjust suitable colour parameters
for SD (Standard
definition) or HD (High definition)
" SD: Input signal is a normal TV system.
" HD:
Input signal is a High-Definition system.
set the
appropriate picture mode based on viewing
environment.
" Home: Picture mode is set as "Standard"
(for optimal picture/power
consumption
for home viewing.
" Shop: Picture mode is set as "Dynamic"
(for in-store display).
Is
I
T X-37LX80A-0022-EN.indd
15
#
3/24108 9:11:06W
I