25
1
Using
Moving the Electronic Board
1 Press the Power Key to turn off
the power.
2 Disconnect the power cord.
• Make sure if there are any other devices
connected to the unit. If so, disconnect them.
3 Release the lock 1 and fold back
the fall-prevention extension legs 2
as follows:
4 Release the caster locks.
5 Move the electronic board with 2
people, avoid banging or shaking
the board.
Notice
• Do not drag or step on the power cord.
6 Lock the casters and set the fall-
prevention extension legs.
For using the optional stand
Locking the
casters
(Push to lock)
UB-5335&5835&5365&5865-PNQX5932ZA-mst.book 25 ページ ２０１２年１１月１２日 月曜日 午前９時４２分
To Next Page
Loading...
