SENSITIVE (ES) DEVICES" section of this service manual.
7.7. IC6001 REPLACEMENT NOTE
Two types of IC6001 (FLASH or MASK) are used on a running change basis, however MASK
TYPE of IC6001 is supplied only as a replacement part.
Perform the addtion (R6010 and R6029) and also deletion (R6009 and R6030) of the following
part simultaneously, when exchanging from the "FLASH TYPE" to the "MASK TYPE" of IC6001.
8. Disassembly and Assembly Instructions
8.1. Cabinet Section
8.1.1. DISASSEMBLY FLOWCHART
This flow chart indicates the disassembly steps of the cabinet parts
and the P.C.Boards in order to gain access to item (s) to be
serviced. When reassembling, perform the step (s) in the reverse
order. Bend, route and dress the wires as they were originally.
27
PDF created with pdfFactory Pro trial version www.pdffactory.com
To Next Page
Loading...
