9.1.2. Installation of USB-SERIAL driver
Execute the "Setup.exe" file in "ComMass" folder by double clicking to install the USB-SERIAL
driver.
9.1.3. COM Mode
If a Disc or SD Card is inserted, remove before operation.
To enter the PC connection (COM) mode, push the [DELETE], [RECORDING START/STOP] and
[JOYSTICK CONTROL UP] simultaneously for 3 seconds without connecting the USB Cable.
9.1.4. Set up of PC-EVR Adjustment Program
29
PDF created with pdfFactory Pro trial version www.pdffactory.com
To Next Page
Loading...
