1. Turn on the PC and install the PC-EVR Adjustment Program into
the PC.
2. Execute the "kdr2006.exe" file by double clicking to start up the
PC-EVR Adjustment Program.
The main menu will be displayed.
3. Select the appropriate model.
4. Turn on the camcorder and set to PC connection (COM) mode.
Then click "Start".
5. When the communication is complete, the dialog will appear.
Click "Yes," and "Save" to save the EEPROM data.
Fig. E2-2
6. When saving EEPROM data is complete, the menu will appear.
To perform each adjustment, display the adjustment menu by
selecting from "Camera Adjust," "Vcr Adjust," "LCD Adjust" or
"EVF Adjust" and select each adjustment item.
Fig. E2-3
30
PDF created with pdfFactory Pro trial version www.pdffactory.com
To Next Page
Loading...
