Note :
1. When removing the cabinet, work with care so as not to break the
Locking Tabs.
2. Place a cloth or some other soft material under the P.C. Boards or
Unit to prevent damage.
3. When reinstalling, ensure that the connectors are connected and
electrical components have not been damaged.
4. Do not supply power to the unit during disassembly and
reassembly.
8.1.2. Disassembly Method
9. Measurements and Adjustments
9.1. Electrical Adustment
9.1.1. Initial Guideline
The table below shows which adjustments are necessary according to the unit parts and
individual parts to be replaced. Make sure to perform these adjustments shown below as
necessary.
28
PDF created with pdfFactory Pro trial version www.pdffactory.com
To Next Page
Loading...
