Watching TV
Basic connection (p. 11-12)
Turn power on
(Remote) (TV)
POWER POWER
or
INPUT
® If the mode is not TV, press _ and select
TV. (p. 28)
Select a channel number
(Remote)
or _
(TV)
• To directly enter the digital channel
number
When tuning to a digital channel,
press the button to enter the
minor number in a compound
channel number.
example: CH15-1:__
® Reselect "Cable" or "Antenna" in "ANT in" of "ANT/Cable setup" to switch the signal
reception between cable TV and the antenna. (p. 15, 47)
® The channel number and volume level remain the same even after the TV is turned off,
18
• Other Useful Functions (Operate after @)
• Select the Audio mode for watching TV
SAP ® Digital mode
Press SAP to select next Audio track (if available) when receiving a digital channel,
® Analog mode
Press SAP to select the desired Audio mode.
• Each press of SAP will change the Audio mode. (Stereo/SAP/Mono)
• Switches the Closed caption mode On or Off
cc ===> ===_
• Press SUB MENU to show the Sub Menu screen (p. 33)
This menu consists of shortcuts to convenient functions.
SUB
MENU
v
To Next Page
Loading...
