Displaying PC Screen on TV
The screen of the PC connected to the unit can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC. (p. 51)
@ Display the Input select menu
INPUT
Select "PC"
® Corresponding signals
(p. 57)
INPUT
• To return to TV ÷ ÷ /
• PC menu setting (change as desired)
® Making settings =#,"How to Use Menu Functions"@ to @ (p. 31)
Menu I Item Adjustments/Configu rations (options)
Reset to Resets PC adjustments. Confirmation screen is displayed. Select "Yes" and press OK to
defaults reset.
® H & V: The H and V sync signals are input from the HD/VD connector. (p. 56)
Sync ® On green: Uses a synchronized signal on the Video G signal, which is input from the
G connector. (p. 56)
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is
Dot clock blurred.
..........
Adjusts the horizontal © " ,:ri:_'_ "
H-position position,
© 0
Adjusts the vertical position. , i.:\I©L/OI
PC V-position :_!:_"
adjustments i
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the
Clock phase Clock Phase so that a clear picture appears.
It may not be possible to display a clear picture due to poor input siqnals.
Switches to wide display.
Input ® Input signal switched from 640×480 to 852×480
resolution
® Input siqnal switched from 1024x768 to 1280x768 or 1366x768
Displays the H (Horizontal)IV (Vertical) frequencies.
H-frequency ® Display range
V-frequency Horizontal: 15 - 110 kHz
Vertical: 48 - 120 Hz
30 ® Audio menu (p. 32)
To Next Page
Loading...
