If you connect equipment that has the "HDAVI Control" function to the TV using an HDMI cable,
you will find it easier to use. Please refer to p. 34-39. Before using these functions, you need to
set "VIERA Link" setting to "On" as shown below.
_ Display the menu
Select "Setup"
Select "VIERA Link settings"
Select "VIERA Link"
• Press to exit from
a menu screen
EXIT
Select "On"
(defaultis On)
• Press to return to
the previous screen
RETURN
Now you can set each "VIERA Link" function according to your preference
(p. 36-39).
® If no HDMI equipment is connected or standard HDMI equipment (non-"VIERA
Link") is used, set it to "Off".
® For more details on the external equipment's connections, please refer to the
operating manuals for the equipment.
®
::3-
G:3
_<.
£3.
O
O0
_D
e'_
ED
<
ED
O0
29
To Next Page
Loading...
