EXIT
ASPECT
HOLD
MENU
OPTION
POWER
RECALL
TV
OFF TIMER
INPUT
Watching TV
Turn power on
Mains power On / Off switch should be On. (p. 8) z
Select a channel
up
down
or
To select the two or three-digit channel z
number, e.g. 39
¨
¨
(in a short time)
If one or two-digit channel number z
¨ ¨ quickly changes the channel
1
Other useful functions
Freeze / unfreeze picture
Display Information banner
Display Information banner
Also appears when changing channels
z
Sound carrier
Colour system *
Channel position / name
Input mode
Channel number
Sound mute On
, , ,
Audio mode (p.43)
1 - 90
Off Timer remaining time
For settings
z
¨ p.15
Teletext
(varies depending on the broadcasters)
Teletext service available
Aspect ratio
To set display timeout
z
“Banner Display Timeout” (p. 23) ¨
To hide z ¨
* Colour system is displayed only when it is set
to other than “Auto”.
“Colour System” in “Manual Tuning” ¨ (p. 27)
“AV Colour System” in Setup Menu ¨
(p. 23)
Select TV mode
Also possible to select the mode using the TV button on the z
side panel of the TV. (p. 8)
Information banner
appears whenever you
select a channel
For details z ¨ below
2
3
Note
When the TV is switched to standby, there will be a clicking sound after a short delay. z
This is normal.