Panasonic Viera TH-P42C10D - Page 39

Advanced
Speaker control
Speaker Selection
You can control the theatre speaker with this TV remote control by pointing at the TV’s signal receiver.
If you cannot operate, check the settings and the equipment z ¨ “VIERA Link features and connections” (p. 34)
Access and control the speaker volume
MUTE
1
Display “VIERA Link Menu”
2
Select “Speaker Selection”
Direct TV Rec
VIERA Link Menu
Start
Pause Live TV
VIERA Link Control
Speaker Selection
Home Cinema
Recorder
Start
select
3
Set to “Home Cinema” or “TV”
set
Home Cinema
Player theatre, Blu-ray Disc theatre or Amplier will be automatically turned on if
it is in Standby mode and the sound is from theatre speakers connected to the
equipment.
Volume up / down z
¨
VOL
(Volume slide bar will be displayed when adjusting the volume
of the equipment.)
Mute
z ¨
MUTE
The sound of TV speakers is mute. z
When the equipment is turned off, TV speakers will be active. z
TV
TV speakers are active.
Note
To enjoy the sound from the DIGA Recorder in multi-channel sound, connect
z
an HDMI cable from the DIGA Recorder to the Amplier (p. 35).
Note
This function may not work properly depending on the connected equipment. z
Image or sound may not be available for the rst few seconds when Input mode is switched. z
Easy playback may be available by using the remote control for Player theatre, Blu-ray Disc theatre or Amplier. z
Read the manual of the equipment.
“HDAVI Control 4” is the newest standard (current as of December, 2008) for HDAVI Control compatible equipment. z
This standard is compatible with conventional HDAVI equipment.
To conrm this TV’s version of HDAVI Control z ¨ “System Information” (p. 23)
Features available (Using VIERA Link Menu)
VIERA Link “HDAVI Control™”
39