Panasonic Viera TX-L32E30E - Displaying PC Screen on TV

Displaying PC Screen on TV
52
Displaying PC Screen on TV
T he screen of the PC connected to the TV can be displayed on the TV.
Y ou can also listen to PC sound with the audio cable connected.
•
T o connect PC (p.90)
1
Select the external input
AV
2
Select [PC]
AV1
AV2
COMPONENT
PC
HDMI1
HDMI2
Input Selection
access
select
•
C orresponding signals (p.98)
•
If [H-freq.] or [V-freq.] is shown in red, the signals
may not be supported.
■
To return to TV
TV
PC menu setting
•
T o make settings “How to Use Menu Functions” (p. 29)
Menu Item Adjustments / Configurations (options)
Picture
Advanced Settings
White Balance
R-Gain Adjusts the white balance of bright red area
G-Gain Adjusts the white balance of bright green area
B-Gain Adjusts the white balance of bright blue area
R-Cutoff Adjusts the white balance of dark red area
G-
Cutoff Adjusts the white balance of dark green area
B-Cutoff Adjusts the white balance of dark blue area
Reset to Defaults Press the OK button to reset to the default White Balance
Gamma
Gamma
Switches the gamma curve [1.8] / [2.0] / [2.2] / [2.4] / [2.6]
•
Please note the numerical values are reference for the adjustment.
Reset to Defaults Press the OK button to reset to the default Gamma
Setup
PC Setup
Input Resolution
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels), XGA (1,024 × 768 pixels),
WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
•
O ptions change depending on signals
Clock Set to the minimum level if noise occurs
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates flicker and distortion
•
Adjust after Clock adjustment
•
Set to the minimum level if noise occurs
Sync
C hooses another synchronous signal if the image is distorted [H & V] / [On Green]
[H & V] : by the horizontal and vertical signals from your PC
[On Green] : by the green signal from your PC (if available)
Reset to Defaults Press the OK button to reset to the default PC Setup settings
•
O ther items (p.30-36)
•
F or HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable
(p.96).