USB HDD Recording
64
One touch direct TV recording - What you see is What you record [One Touch Recording]
Records the current programme in the USB HDD immediately.
●
Confirm the code of the remote control is “73” (p. 32).
Select the maximum recording time [30] / [60] / [90] / [120] / [180] (minutes)
Recording Setup
One Touch Recording 180 minutes
select
access / store
●
LED will turn to orange (flash) while One
Touch Recording is in progress.
“Indicator / Control panel” (p. 12)
■ To start One Touch Recording
Start
●
No other channel can be selected while the recording is in progress.
■ To stop recording on the way
or
■ To play back or delete the recorded contents “Recorded TV mode” (p. 71)
●
Even if One Touch Recording is in progress, you can play back all the contents. (Depending on the USB HDD, it may
not be available or the recording may not work properly while playback.)
Record constantly [Rewind LIVE TV]
Records the current programme constantly.
●
Confirm the code of the remote control is “73” (p. 32).
Select [Auto] to start [Rewind LIVE TV]
Recording Setup
Rewind LIVE TV
Auto
select
access / store
●
When you select [Auto], the recording will
start automatically.
●
This recording will not start if the other
recording is in progress, TV signal condition
is bad or any images are not displayed.
■ To operate [Rewind LIVE TV]
●
To pause
●
To search backward (up to 90 minutes)
●
After pausing or searching backward, the following buttons are available to operate.
Search backward
Playback / Pause
Return to the current programme
Search forward
Search backward /
forward
Pause /
Playback
Playback
Return to the
current programme
■ To stop [Rewind LIVE TV]
Rewind LIVE TV
Recording Setup
Off
Auto
select [Off]
●
If you stop [Rewind LIVE TV], the recorded
content for [Rewind LIVE TV] will be deleted.
●
[Rewind LIVE TV] will be stopped and the recorded content deleted automatically in the following conditions:
(Even if [Rewind LIVE TV] stops for the following conditions, as long as the setting is [Auto], the new recording will
start automatically in a condition that makes the recording available.)
•
Selected other channels
•
Selected locked channel
•
Selected invalid channel
•
No TV signal
•
When the other recording starts
•
When the TV is turned to Standby or off
To Next Page
Loading...
