Panasonic VL-W605BX - Monitoring the Door Station

Doorphone
23
Monitoring the outside (Door station monitor)
You can monitor the sound and image taken by the door station.
LIf an optional lobby station is connected to the main monitor station (page 4), you cannot monitor outside
where the lobby station is located.
{TALK}
{OFF}
{PAGE}
{MENU}{VOLUME}
{MONITOR}
{D}
{OFF}
{TALK}
{
▲
} {▲}
{MONITOR}
1 Press {MONITOR}.
LThe outside image will be shown on the display, and you will hear the sound from outside.
(The sound from your end will not be heard at the door station.)
LTo speak to the other party at the door station, press {TALK}.
2 To end monitoring, press {OFF}.
N When installing 2 door stations
When you press {MONITOR} in step 1, the following is displayed.
Select the desired door station:
: Press {VOLUME} (
▲
) or {PAGE} (▲), then
press {MENU} (OK).
: Press {▼} or {▲}, then press {D} (OK).
Note:
LMonitoring will automatically end in about 90 seconds.
LYou can perform the following operations during monitoring. For more details, see page 19.
– Turning the door station’s LED lights on or off
– Using backlight compensation for door station images
– Scrolling an image right or left on the sub monitor station
– Adjusting the display brightness
– Hiding the operation guidance
– Adjusting the speaker volume
When using an additional door station:
LWhen you receive another call from the other door station while monitoring, see page 22.
(Example: Main monitor station)
SELECT DOOR STATION
DOOR STATION 1
DOOR STATION 2
SW251BX_OI.indb 23 9/17/2014 11:05:13 AM