Panasonic VL-W605BX - Changing the Function Settings of the Sub Monitor Station (Function List)

Programming
40
Changing the function settings of the sub monitor station
(Function list)
How to change the function settings
{OFF}
{
▲
} {▲}
{MENU}
{D}
1 Press {MENU}, then select the desired item by
pressing {
▲
} or {▲}.
2 Press {D} (OK), then select the desired setting
by pressing {
▲
} or {▲}.
LIn some functions, repeat this operation
according to the display instructions.
3 Press {D} (OK).
4 To end the setting, press {OFF}.
Note:
LWhen receiving a call while setting or no operation is done for about 90 seconds, the setting function screen
automatically quits.
Function list of the sub monitor station
The default setting is indicated in bold.
Item (function) Setting
RING VOLUME DOOR: HIGH, MEDIUM, LOW, OFF
PAGE : HIGH, MEDIUM, LOW
LYou can select the ringer volume of the sub monitor station (page 33).
RING TONE DOOR 1: SOUND1, SOUND1 REPEAT,
SOUND2, SOUND2 REPEAT,
SOUND3, SOUND3 REPEAT
DOOR 2: SOUND1, SOUND1 REPEAT,
SOUND2, SOUND2 REPEAT,
SOUND3, SOUND3 REPEAT
LYou can select the ringer tone of the sub monitor station for calls from a door
station (page 34).
SW251BX_OI.indb 40 9/17/2014 11:05:14 AM