128
18 Disassembly and Assembly Instructions
18.1. To Remove Front Plate
Please follow the steps below for take out front plate. Before removing the front plate of indoor unit, always switch off all power
supply (i.e. indoor unit power supply, heater power supply and boiler tank power supply).
1. Remove the 2 mounting screws which located at bottom of the front plate and 1 mounting screw at the front of the plate.
2. Gently pull the lower section of the front plate towards you to remove the front plate from left and right hooks.
3. Hold the left edge and right edge of front plate to lift up front plate from hooks.
18.2. To Remove Cabinet
WARNING
High Voltage are generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding
with repair work. Failure to heed this caution may result in electric shocks.
To Next Page
Loading...
