Panasonic WH-UD07JE5 - Installer Setup: System Configuration; PCB, Sensor, and Heater Settings

24
ENGLISH
3-2. Installer Setup
1
System setup Optional PCB connectivity Yes/No
2
Only when the selection for Optional PCB is Yes
Zone & Sensor
1 Zone system / 2 Zone system Zone settings
3
Heater capacity Capacity select
4
Anti freezing
5
DHW Capacity Variable/Standard
6  Only when the selection for Optional PCB is Yes
Buffer Tank connection
Yes/No T setup
7
Base pan heater
Yes/No A / B
8
Alternative outdoor sensor Yes/No
9
Bivalent connection
Yes/No Bivalent setup
10
External SW Yes/No
11
 Only when the selection for Optional PCB is Yes
Solar connection
Yes/No Tank setup Solar setup
12
 Only when the selection for Optional PCB is Yes
External Error signal
Yes/No
13
 Only when the selection for Optional PCB is Yes
Demand control
Yes/No
14
 Only when the selection for Optional PCB is Yes
SG ready
Yes/No Capacity setup
15
 Only when the selection for Optional PCB is Yes
External Compressor SW
Yes/No
16
Circulation liquid Water/glycol
17
 Only when the selection for Optional PCB is Yes
Heat-Cool SW
Yes/No
18
Force Heater Auto/Manual
19
Force Defrost Auto/Manual
20
Defrost Signal Yes/No
21
Pump fl owrate T/ Max. Duty
Yes/No