Panasonic X70 - Splitting a Multi-Party Call; Adding People

33
Voice calls
Voice calls
Adding people
You can add people to the multi-party call (up to a maximum of five), either by making
a call or accepting an incoming call. You can then merge the new call into the multi-party.
 Press Q.
 Select Merge.
Splitting a multi-party call
You can select a caller from the multi-party call and remove their connection, so that you
can talk privately to them.
 Press Q.
 Select Option.
 Select a caller.
 Select Split.
The selected caller is split from the multi-party and the multi-party call is placed on hold.
The remaining multi-party callers can still talk to each other.
Rejoining a multi-party call
When you have finished talking to an individual you can rejoin the multi-party call:
 Press Q.
 Select Merge.
Ending a single connection to a multi-party call
 Press Q.
 Select Option.
 Select a caller.
 Select End.
Ending all connections to a multi-party call
Press E.
Note: When you make a call or accept an incoming call, the multi-party call is placed on
hold. The other callers in the multi-party call can continue to talk to each other
while on hold from you.
Note: You cannot end an individual caller if you have a call on hold or another call is
incoming.
Note: This ends all calls, including those on hold or split from the multi-party call.